ROW-MASTER RN_S

ROW-MASTER RN_S is an inter-row cultivator designed for the disruption of the soil crust and regulation of weeds in the sugar beet crop.

The cultivator has various working parts (shares, chisels, ridging bodies) with a varied setting variability so that it is possible to respond to the current soil conditions and the size of the crop.

Each working unit operates on a parallelogram linkage seated on silent blocks. This unique maintenance-free design creates permanent down pressure on the support wheel.

The machine may be equipped with the CultiCam device, which can navigate the machine starting at two true leaves of the sugar beet, thus allowing for very early inter-row cultivation.

Maintenance-free parallel linkage for the working units Self-guidance system with CultiCam guides the cultivator into rows Hydraulic folding of the cultivator side framesFrame clearance of the cultivator 42 cm Increased down pressure of the working units thanks to the Support wheels for each working unit with working depth setting for the unit Stabilising steel control wheels guide the cultivator through the crop System of hydraulic movement 3-point hitch of the cultivator responding to the information received from CultiCam of category II and IIIsilentblock seating of the units
Concept Row-Master RN_S

WORKING SECTION WITH PLOUGHSHARES

For the first early spring inter-row loosening, we recommend using 150 mm shares with 100% covering. The shares are affixed to flexi-tines. This first operation removes the soil crust and gives a basic weeding of rows. Weeds are pulled out of the soil and the early is shaken from their roots, so the weeds quickly wilt.

WORKING SECTION WITH CHISELS
 

For subsequent loosening, it is a good idea to use chisels (width 40 mm). The chisels are affixed to the last flexi-tines. During later growth phases, the soil is usually harder and as such we recommend using 1 chisel instead of 3 shares. The soil is effectively enriched with oxygen and holds moisture better.

WORKING SECTION WITH COVERING SHARES

As the final work operation, we recommend using covering shares. Covering reduces the size of tops. This has a positive impact on the final valuation of the tuber by the processor (sugar refinery). 
 

 

Machine type: inter-row cultivator for beet
Operating components: working units with various equipment (3× 150 mm shares for early cultivation, 1× 150 mm share + 2× 40 mm chisels for later cultivation, 1× 60 mm ridging bodies)
Securing: shares and chisels with spring steel tines
Usage: inter-row cultivation
Working operations: cultivation of beet inter-rows, elimination of the soil crust, control of the growth of weeds and weed beet

 

Possibility of precise self-guiding using the CultiCam crop monitoring system.

Maintenance-free parallelogram linkage. The silent-block seating of the working units increases down pressure on the soil.

The shares (chisels) work in flexible tines made from spring steel. The Flexi-tines allow movement in three directions (“3D” effect).


Working Tools

Cultivating Section – 1 Share + 2 Points

Cultivating Section – 1 Share + 2 Points

1 share (width 150 mm) + 2 points (width 40 mm)

Cultivating section – 3 shares

Cultivating section – 3 shares

3 shares (width 150 mm)

Ridging section – 1 body with mouldboard

Ridging section – 1 body with mouldboard

1 body (width 60 mm) with mouldboard

Base

Plants Protection by Discs

Plants Protection by Discs

Diameter: 400 mm

Optional

Weed Rake

Weed Rake

Electronic Selfguiding Culti-Cam

Electronic Selfguiding Culti-Cam

Monitor Culti-Cam

Monitor Culti-Cam

ROW-MASTER RN_S RN 6000 S RN 9000 S
Working width m 6 9
Working depth* cm 2 - 10 2 - 10
Number of Discs pcs 24 36
Number of Rows pcs 12 18
Inter-Row Spacing cm 45 - 0 45
Number of Shares – Early Cultivation (3 pcs per unit) pcs 37 55
Number of Shares and Chisels – Late Cultivation (1 share and 2 chisels per unit) pcs 13/24 19/36
Number of Chisels for Ridging pcs 13 19
Recommended output* HP 70 - 80 100 - 120
Total weight kg 1580 2200

* depends on the soil conditions
 

Video

ROW-MASTER RN_S

Photos

Leaflet

Share 60 mm

Share 60 mm

RN_S

  • 1 - KM060083 HOLDER 1
  • 2 - KM060324 SHARE 1
  • 3 - 00688162 DEFLECTOR 1
  • 4 - KM000616 SCREW 2
  • 5 - KM000325 NUT 2
  • 6 - KM000056 WASHER 3
Share 150 mm

Share 150 mm

RN, RN_S

  • 1 - KM060310 SHARE 1
  • 2 - KM000221 SCREW 1
  • 3 - KM000096 NUT 1
Chisel 40 mm

Chisel 40 mm

RN, RN_S

  • 1 - KM060346 CHISEL 1
  • 2 - KM000221 SCREW 1
  • 3 - KM000096 NUT 1
Protection disc

Protection disc

RN, RN_S

  • 1 - KM060347 DISC 1
  • 2 - KM000024 WASHER 12
  • 3 - KM000879 SCREW 6
  • 4 - KM000157 NUT 6
Tine harrow tines

Tine harrow tines

RN, RN_S

  • 1 - KM210007 TINE 1
  • 2 - KM000759 STIRRUP 1
  • 3 - 00692702 WASHER 1
  • 4 - KM000155 NUT 2