FENIX FO / FO_L

FENIX FO/FO_L is a versatile 4-row cultivator with cleverly located tines.

The transport axle is situated in the middle of the machine and tines can be found behind the transport wheels. This gives you the option of working without rear packers. Turning at headlands has also become easier thanks to axle in the centre.

The constant geometry of each tine, secured with auto-reset system, makes light work of fields, even in the more challenging conditions. The Fenix FO/FO_L can be equipped with an Alfa Drill with a comfortable platform and stairs to the 200 l seed tray, for drilling the covering crops.

Working tines are spaced at 80 cm with a span of 31 cm.Spacious frame design. rear packers for different soil types.Various types ofreset tines. Spring auto-of 86 cm enables it to easily pass a large volume of straw and other crop residue." The high frame clearance surface levelling. The discs are secured with rubber segments and are easily adjustable. Levelling discs for perfect it easy to work in heavy soils. The fixed geometry of tines reduces pulling require--ment of the machine, saving fuel. 4 rows of tines with a fixed geometry, with a tractor using lift arms (two point drawbar), towing eyes or ball coupling (K80). The Fenix can be attached rear packers. The surface behind the wheels is handled by tines to eliminate any tracks. allows it to operate without The integrated transport axle using hydro-clips. Depending on the choice of features working depth can be set up also hydraulically during work.Easy to set up a working depth of Fenix
Concept Fenix FO

 

Fenix FO model is protected against overload with Vertical Spring Auto-Reset System.

Fenix FO_L model is protected against overload with Horizontal Spring Auto-Reset System or Shear Bolt. Springs are pre-tensioned to resistance a load of 400 kg with maximul ca pat 450 kg.

 

Machine type semi-mounted 4-row versatile cultivator
Operating components 4 rows of tines (280 mm arrow-shaped shares, chisels 60/80 mm or Long Life chisels 80 mm, winged chisels), levelling discs/spring levellers, rear packers (tube, steel ring, roadpacker, spring, V-ring, U-ring, double U-ring, double packer – for more see p. 60)
Securing vertical double spring auto-reset system (FO) / horizontal single spring auto-reset system (FO_L) or shear bolt (FO_L)
Accessories Ferti-Box hopper, Alfa Drill, front supporting wheels, braked axle, hydraulic adjustement of machine, covers of shares, drawbar, lighting
Working operations intensive treatment at the selected depth (depending on the used shares), uniform mixing of crop residue, levelling and
compaction, drill covering crops (Alfa Drill)

 

Loosens intensively at depths of up to 35 cm. The high throughput of the machine ensures lower fuel consumption and lower
horsepower requirements.

You can equip the Fenix FO/FO_L with an Alfa for drilling covering crops.

Thanks to the integrated transport axle you can work without a rear packer, e.g. in
waterlogged soils.


Main advantages of the machine

  1. Loosens deeper than standard cultivators, it can reach a working depth of up to 35 cm.
  2. Covers and mixes plant residue evenly through the soil after the harvest
  3. A high crumbling effect due to the large number of tines on the machine.
  4. A level finish is left behind the machine.
  1. Consolidation of the worked surface ensures the germination of volunteer plants and weeds
  2. Can even be used in wet and soggy conditions without rear packers.
  3. Ensures your agro-technical deadlines, allowing you to work in waterlogged conditions.
Fenix

Cost saving benefits resulting in higher profits:

  1. Mixes crop residue intensively into the soil in a single pass.
  2. Saves time – significantly reduce the amount of man hours needed in comparison to traditional tilling equipment (ploughs) by using the Fenix. The Fenix prepares the soil in a way that minimises the need for additional preparation work on the soil.
  3. Deeper tillage with lower fuel consumption – thanks to the fixed tines geometry, it’s easy to prepare a deep soil layer whilst still keeping fuel costs at an affordable level.
  1. Requires low tractive force – the fenix is defined by its low tractive force requirement, due to the correct positioning of the tines in relation to the soil.
  2. Costs of wearable parts are noticeably lower than for traditional ploughs.
  3. A short and compact design – provides comfortable and safe transportation on the road, hassle-free driving onto the land, improved overall manoeuvrability compared to its rivals.
 
Portrait The great advantage of the Fenix is the location of the axle between the tines. I want to till some of my fields before the winter without compaction. Small ridges are usually left behind on the fields and freeze. In springtime, these ridges dry out faster because they have a greater surface area than a flat surface. I also really appreciate the length of the machine. The machine is short and compact and it allows me to work comfortably between the individual plots.

Jacob Justensen | owner
Braedstrup (Denmark) | area: 350 ha
FENIX FO 5000 with Alfa Drill

 

LONG LIFE CHISELS

Reinforced Long Life chisels with an extended service life are fitted with carbide plates and improved protection at the bottom part and around bolts. The service life of these chisels spans several times more compared to the conventional ones, this is suitable mainly for abrasive soils. The time normally spent on chisel replacement may be used more effectively. Long Life for your comfort and lower total cost.

Size: 40 and 80 mm

Fenix

You can use the fenix for

  1. Shallow cultivation with shares that prevent capillary action over the whole width of the machine.
  2. Medium depth tillage using points with wings achieves evenly mixed crop residue through the soil profile.
  3. "Deep intensive loosening using chisels, creates a quality soil climate and breaks up the compacted layers. "
  4. The incorporation of large crop residue in one pass due to the intensive mixing.
  1. Soil consolidation by using the packer, which prevents moisture loss.
  2. Work in waterlogged conditions, e.g. in late autumn or winter, the Fenix FO/FO_L has a high throughput and can be used without rear packers.
  3. And much more…

Tilling wheat stubble

— cultivation depth: 15 cm
— working speed: 12 km/h
— fuel consumption: 11–12 l/ha

Tilling rape volunteer plants

— cultivation depth: 20 cm
— working speed: 12 km/h
— fuel consumption: 12 –14 l/ha

Tilling maize stubble

— cultivation depth: 25 cm
— working speed: 10 km/h
— fuel consumption: 18 l/ha

Fenix

Machine performance

The bottom profile of the cultivated soil is the basis of quality soil preparation
"The bottom soil profile depends on the selected soil engaging parts. Sufficient overlapping, their shape and angle then play a significant role in the appearance of the cultivated soil. Fenix cultivators feature high overlap of points and wings which ensures a flat bottom. The bottom levelness can be measured by thoroughly cleaning cultivated soil from the furrow bottom. The same method can also be used to ensure the operation depth is maintained throughout the entire machine`s width. The Fenix is fitted with points and wings that guarantee a flat bottom and constant operation depth throughout the entire width. Tested and proven in practice!"

Planarity of cultivated surface
Uniformly level profile of the soil surface processed by the cultivator is the result of just how well the rotary discs fitted behind the tines work. Channels or ridges cannot be eliminated even with heavy packers. The soil must be levelled before the packers. The levelling discs on the Fenix are adjustable and ensure the flatness of the soil surface.

Fenix

Working parts for various work operations

Clip-on shares

Shares of 280 mm in width are convenient tools for shallow stubble and for undercutting of the soil profile across a full working width and mixing it with the crop residue. This activates the second growth and weed for their subsequent elimination.

 

MULCH CHISELS WITH WINGS

The chisel (40 or 80 mm) can be fitted with wings (125 or 185 mm - Long Life) for perfect cultivation of the soil down to medium depths, followed by the even mixing of crop residue. The wings improve this mixing effect and ensure the undercutting of the soil across the full machine width.

 

MULCH CHISELS WITH MOULDBOAR

Suitable for the deep intense cultivation of the full profile meaning a prompt and cheap restoration of the soil stucture. the combination of chisels (40 or 80 mm) and the mouldboard induces a high mixing effect at low machine resistance to the soil.

 

Work under extreme conditions

Work under extreme conditions thanks to the integrated axle
The integrated axle is located between the operating tines which enables the machine to operate without a rear packer (additional tines work begind the transport wheels). Packers can be removed in wet conditions for processing the soil without compacting. This advantage can be used to prepare the soil before winter, when it usually requires no rolling. Another advantage of the integrated axle is the improved dexterity of the machine at the headlands (shorter turning radius).

The fenix is a simple solution to waterlogging
Even if you may not have managed to cultivate your soil before torrential rains, and the subsequent result is your fields become waterlogged, the Fenix can be deployed immediately. These situations mainly occur in the summer periods and approach the deadlines for the sowing of winter crops. With its hydraulic controls (front supporting wheels, rear packers), the Fenix enables a prompt response to waterlogging by raising the rear packers (jamming risk), the machine operates on its axle to cultivate the wetter parts of the field and contributes to drainage of problematic areas. After cultivating the wet area, the rear packers can be re-engaged instantly to complete the fields cultivation with soil consolidation.

Fenix

Cultivation without packers = faster drainage (travel on axle on waterlogged soil)

 
Fenix

Cultivation with consolidation (roller travelling)

 
Fenix

SUPPORTING WHEELS

Supporting wheels allow the machine to operate at a constant working depth at high operational speeds. This improves the consistancy of mixing thoughout the soil profile. The supporting wheels can be controlled via the tractor hydraulics.

SPACIOUS MOUNTING OF THE INTEGRATED AXLE

The design engineers fitted the axle into the frame to make sufficient space between the axle frame and wheels.

HYDRAULICALLY CONTROLLED MACHINE

Packers with hydraulic control can be disengaged immediately, e.g. on waterlogged sections of the field. The rear packers on the non-hydraulic models can be locked out.

Packers

Tube Packer

Tube Packer

A traditional packer with stainless steel rods that have a classic crumbling effect.
Weight: 110 kg/m
Diameter: 635 mm

V-ring Packer

V-ring Packer

Heavy duty steel packer for all types of soils. Intensive crumbling and firming of the soil.
Weight: 176 kg/m (incl. Scrapers)
Diameter: 630 mm

U-Ring Packer

U-Ring Packer

A steel packer for all soil types with high quality break-up and low stickiness due to the „U“ rim profile.
Weight: 155 kg/m 
Diameter: 600 mm

SPRING Packer

SPRING Packer

The packer has an excellent crumbling effect and reduces the risk of blockage for soil with high moisture content.
Weight: 116 kg/m
Diameter: 550 mm

Steel Ring Packer

Steel Ring Packer

Packer with stainless steel components for superior compaction, suitable for all soil types.
Weight: 177 kg/m
Diameter: 525 mm

Double U-Ring Packer

Double U-Ring Packer

A double row steel packer with auto-cleaning effect, excellent break-up and low stickiness due to the „U“ rim profile.
Weight: 163 kg/m
Diameter: 600 mm

Roadpacker

Roadpacker

Packer made of a hard natural rubber suitable for all soil conditions with very low tack.
Weight: 193 kg/m
Diameter: 585 mm

Hitch

Towing Eye

Towing Eye

35 mm • 40 mm • 51 mm

Towing Bracket

Towing Bracket

Attachment III. cat.

Ball Pin

Ball Pin

K80

Three Point Bracket

Three Point Bracket

Attachment III. cat.

Base

Vertical AUTO-RESET System [Fenix FO]

Vertical AUTO-RESET System [Fenix FO]

Fenix FO only
• Vertical AUTO-RESET system
• 2 safety springs

Shear Bolt – Securing of Working Tines [Fenix FO_L]

Shear Bolt – Securing of Working Tines [Fenix FO_L]

Fenix FO_L only

Spring Levellers

Spring Levellers

Optional

Horizontal AUTO-RESET system [Fenix FO_L]

Horizontal AUTO-RESET system [Fenix FO_L]

Fenix FO_L only
• Horizontal AUTO-RESET system
• safety spring

Points with TWIST effect – LONG LIFE

Points with TWIST effect – LONG LIFE

LONG LIFE (carbide)

Wings

Wings

• 125 mm
• 185 mm
• 185 mm LONG LIFE (carbide)

Levelling Discs Secured by Rubber Segments

Levelling Discs Secured by Rubber Segments

Tine Harrow

Tine Harrow

Rear Hitch

Rear Hitch

Rear Hitch for attachment of rear rccessories (Cutterpack, Presspack)

Fertilizer Set

Fertilizer Set

Flow Dividers and Connecting Hoses

Hydraulic Depth Adjustment

Hydraulic Depth Adjustment

FENIX FO / FO_L FO 4000 FO 5000 L FO 5000 FO 6000
Working width m 4 4,7 4,7 5,9
Transport width m 3 3 3 3
Transport length m 8.1 8.1 8.1 8.1
Working depth* cm 5 - 35 5 - 35 5 - 35 5 - 35
Number of tines pcs 13 15 15 19
Spacing of tines cm 31 31 31 31
Recommended output* HP 200 - 280 300 - 350 300 - 350 350 - 400
Total Weight** kg 5650 - 7150 4700 - 6550 6150 - 7800 6960 - 8900

* depends on soil conditions
** depends on the machine accessories

Video

FENIX FO / FO_L

Photos

Leaflet

Share Clip-On 280 mm

Share Clip-On 280 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060153 WEDGE 1
  • 2 - KM000436 SCREW 1
  • 3 - KM000296 NUT 2
  • 4 - KM000435 SCREW 1
  • 5 - KM060053 SHARE 1
Scraper V-ring roller

Scraper V-ring roller

FN, FN_L, FN_RT, FO, FO_L

  • 1 - 00037392 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00000754 HOLDER 1
Spring leveller – left

Spring leveller – left

FO, FO_L

  • 1 - 00663000 ARM 1
  • 2 - KM000138 SCREW 2
  • 3 - KM000006 WASHER 4
  • 4 - KM000111 NUT 2
Spring leveller – right

Spring leveller – right

FO, FO_L

  • 1 - 00662949 ARM 1
  • 2 - KM000138 SCREW 2
  • 3 - KM000006 WASHER 4
  • 4 - KM000111 NUT 2
Levelling disc – left

Levelling disc – left

FN, FN_L, FO, FO_L

  • 1 - KM060250 DISC 1
  • 2 - KM000463 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1
Levelling disc – right

Levelling disc – right

FN, FN_L, FO, FO_L

  • 1 - KM060251 DISC 1
  • 2 - KM000463 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1
Scraper Roadpacker

Scraper Roadpacker

FN, FN_L, FN_RT, FO, FO_L

  • 1 - 00023579 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046816 HOLDER 1
Chisel 80 mm

Chisel 80 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060227 CHISEL 2
  • 2 - KM060252 METAL DEFLECTOR RIGHT 1
  • 3 - KM000854 SCREW 6
  • 4 - KM000855 NUT 6
Chisel 60 mm

Chisel 60 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060177 CHISEL 2
  • 2 - KM060257 METAL DEFLECTOR 1
  • 3 - KM000854 SCREW 6
  • 4 - KM000855 NUT 6
Share wing 185 mm LONG LIFE

Share wing 185 mm LONG LIFE

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060316 WING 1
  • 2 - KM060317 WING 1
  • 3 - KM000890 SCREW 2
  • 4 - KM000296 NUT 2
Share wing 185 mm

Share wing 185 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060192 WING 1
  • 2 - KM060193 WING 1
  • 3 - KM000548 SCREW 2
  • 4 - KM000296 NUT 2
Share wing 125 mm

Share wing 125 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060190 WING 1
  • 2 - KM060191 WING 1
  • 3 - KM000548 SCREW 2
  • 4 - KM000296 NUT 2
Chisel 80 mm LONG LIFE

Chisel 80 mm LONG LIFE

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060334 CHISEL 2
  • 2 - x x 0
  • 3 - KM000854 SCREW 2
  • 4 - KM000858 SCREW 2
  • 5 - KM000855 NUT 4
  • 6 - KM060253 METAL DEFLECTOR 1
Chisel 80 mm LONG LIFE

Chisel 80 mm LONG LIFE

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060334 CHISEL 2
  • 2 - KM060252 METAL DEFLECTOR 1
  • 3 - KM000854 SCREW 2
  • 4 - KM000858 SCREW 2
  • 5 - KM000855 NUT 4
Chisel 80 mm

Chisel 80 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060227 CHISEL 2
  • 2 - X X 0
  • 3 - KM000854 SCREW 6
  • 4 - KM000855 NUT 6
  • 5 - KM060253 METAL DEFLECTOR LEFT 1
Chisel 60 mm

Chisel 60 mm

FN, FN_L, FN_RT, FO, FO_L

  • 1 - KM060177 CHISEL 2
  • 2 - KM060257 X 1
  • 3 - KM000854 SCREW 6
  • 4 - KM000855 NUT 6
  • 5 - KM060258 METAL DEFLECTOR 1
Scraper Steel ring packer

Scraper Steel ring packer

FN, FN_L, FN_RT, FO, FO_L

  • 1 - 00029738 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046596 HOLDER 1