SWIFTERDISC XO_F

SWIFTERDISC XO_F is a short compact disc cultivator with high working speeds of up to 15 km/h.

Thanks to the precise distribution of the center of gravity (the axle is placed in front of the rear packer) the machine excels and is perfectly stable, irrespective of the high operating speeds.

Each arm is fitted with a pair of discs (Twin-Disc system). The offer also includes the unique A-discs which cut crop residue better and mixe it with the soil. This will allow you to cultivate large amounts of crop residue.

A perfectly smooth surface without any ridges between the packers is ensured by the three-piece overlapping rear packer.

greater stability and improvedFront supporting wheels meancontrol at higher speedsthanks to the Twin-Disc systemin two rows with a high throughputSerrated discs or A-discsPackers and crumbling rollers The integrated transport axle spreads the centre of gravity.The machine is perfectly stable
Machine type: semi-mounted disc cultivator of short conception
Operating components: 2 rows of serrated discs 520×5 mm (serrated discs with constant geometry or uniquely profiled A-discs), the Trash Cutter – cutting roller,
(tube, steel ring, roadpacker, tyrepacker, spring, V-ring, double U-ring, double packer, cutpack – for more see p. 60)
Securing: each arm with zero-maintenance rubber segments
Usage: swift, low cost and high quality stubble cultivation, crop residue cutting, seedbed preparation
Working operations: loosens the surface layer, cuts crop residue, uniform mixing of crop residue, disrupts capillarity, settlement and compaction, seedbed preparation, drill covering crops (with Alfa Drill)

 

Thanks to the integrated transport axle the machine is very stable regardless of its high speed and has a small turning radius.

High speed intensive stubble cultivation or seedbed preparation. The quality of the work can be increased by using A-discs.

You can equip the SwifterDisc XO_F with an Alfa Drill for drilling covering crops.
 


Agronomic advantages of the machine

  1. The stubble cultivated immediately after the harvest takes advantage of the higher soil moisture content.
  2. Fast stubble tillage forms the foundation for a managed germination process of second growth and weeds following the harvest.
  3. Shallow tillage means greater humus content in the upper soil layer creating a more permeable soil (no soil crust).
  4. Fine crumbling due to the high speed of the machine and the resulting high circumferential speed of the packers, which delivers a flatter field without clods.
  1. Compaction of the cultivated surface ensures the even germination of volunteer plants and weeds.
  2. Agrotechnical deadlines are met as a result of the machine’s high performance and coverage.
  3. All-purpose tool for stubble tillage, soil preparation and intercropping with an Alfa Drill.

All-purpose tool for stubble tillage, soil preparation and intercropping with an Alfa Drill.

Swifterdisc

Cost savings benefits

  1. Quality tillage in one pass – one pass instead of many, quality cutting, mixing and incorporation of plant residue due in particular to the profiled aggressive A-discs.
  2. High operating speeds – means cutting costs and the number of hours spent out on the field. the high speeds are reached thanks to the high stability of the machine.
  1. Large area capacity – SwifterDisc is a light disc cultivator which can be connected to tractors of lower output, while the operating width and operating speed guarantee unusually high performance.
  2. Low maintenance costs – the components have a longer lifespan.
 
Josef Skála, předseda družstva The machine breaks up clods and levels the land perfectly. I must say that I am very pleased with this new machine, because its stability is excellent even at higher speeds of over 15 km/h.

Jaroslav Skala | chairman
An agricultural co-operative located in Suchdol | district Pribram (Czech Republic)
area: 1 295 ha | machine: SwifterDisc XO 6000 F

Swifterdisc

You can use the swifterdisc for

  1. Shallow and fast stubble tillage to stimulate volunteer plant and weed germination and prevent capillary action.
  2. Maintain the moisture in the soil by compacting the surface with a rear packer immediately after the harvest.
  3. Seedbed preparation which includes levelling the furrow.
  1. The incorporation of plant material such as intercrops.
  2. Planting intercrops and grasses using an Alfa Drill.

Demonstration on grain stubble field

Ukázka práce po obilovině
machine: SwifterDisc XE 10000
cultivation depth: 7 cm
number of passes: 1
working speed: 18 km/h
fuel consumption: 6,5 l/ha

A DEMONSTRATION ON THE ROUGH FURROW

Ukázka práce v hrubé brázdě
machine: SwifterDisc XO 6000 F
cultivation depth: 12 cm
number of passes: 1
working speed: 10 km/h
fuel consumption: 9 l/ha

Better quality work

A-DISCS: A new dimension to work quality

Specially shaped discs of 520 mm in diameter and a wall thickness of 5 mm with significantly high cutting and mixing abilities compared to other classic cutting discs. A-discs have a large number of blades around their circumference for the easy incorporation of large amounts of crop residue. These sharp blades cut up the crop residue efficiently. The profiled shape also allows a larger amount of soil to be lifted up than with standard serrated discs. Each profiled disk takes soil and takes it to the plant mulch where it is mixed. This concept delivers excellent results.

Blades with significant

cutting capacity

The direction of

the disc rotation

Profiling creates more

soil for incorporating

plant residue

THE TWIN-DISC ENSURES A BETTER THROUGHPUT

The discs work in pairs on one arm. This solution means the distance between each arm is larger (50 cm). This results in more space for the material to pass through the machine. The machine can work smoothly even when the combine has left clumps of straw on the field. SwifterDisc cuts it up, spreads it out, mixes it with soil and covers it.

THE INTEGRATED AXLE

The axle located in front of the packers balances the centre of gravity and reduces the turn radius at the headlands.

FOLDING THE MACHINE

The swifterdisc xo_f can be folded upwards along the central frame, having two side frames. it has a transport width up to 3 m.

Why should the cultivation be done immediately after the harvest

The foundations for successful crop growth are laid when harvesting the previous crop. By tilling the stubble immediately after harvest, you can use the moistness of the soil, which was protected from the sun by the stems.

Fast tilling ensures the reliable and even germination of volunteer plants and weeds. The basis for success here is a short interval between the harvest and sowing. Whether the farming is done by using a minimum-tillage system or a conventional method it is irrelevant.

Swifterdisc

A DISC DIAMETER OF 520×5 MM

The standard model of SwifterDisc cultivators is fitted with serrated discs with with a dimension of 520×5 mm. For an additional fee, you can have the machine fitted with aggressively profiled A-discs.

MAINTENANCE-FREE AXIAL BEARINGS

Axial ball bearings with oblique contact are encased with two static, one dynamic cassette and four rib seals in a solid metal body.

1 – dynamic cassette sealing with four ribs,
2 – metal body,
3 – static sealing,
4 – four-point bearing,
5 – double sealing

SECURING OF DISCS

Rubber segments prevent bumps created during soil tillage. The machine functions quickly without maintenance regardless of tough conditions. High quality, long-life rubber is used!

SIDE SHIELDS

Swifterdisc machines can be equipped with side shields (discs) which prevent the formation of ridges around the edges of the machine. individual passes cannot be seen.

FRONT HYDRAULICAL PADDLE LEVELLING BARBAR – CRUSHBAR

The SwifterDisc XO_F and XE models can be fitted with a front hydraulic paddle levelling bar – Crushbar (excellent for seedbed preparation). It levels out the land including the rough furrow in front of the discs.

HYDRAULICALLY CONTROLLED WORKING DEPTH

The working depth can easily be set using the roller control, or the front supporting wheels. it can be set mechanically or hydraulically.

Swifterdisc

Stable tillage, flat land

For tillage, a level surface must be maintained both horizontally to the direction of work and along the direction of work. To achieve flat land without mounds, the machine must operate smoothly and in a stable manner.

Any unwanted movement of the machine through, e.g. rocking, creates an uneven field. Till with the stable SwifterDisc with its cleverly positioned centre of gravity.

 

Working Tools

Notched Discs

Notched Discs

Notched Discs
• 520 × 5 mm
• 8 pcs / 1 m

A-Discs (AGGRESSIVE)

A-Discs (AGGRESSIVE)

A-Discs (AGGRESSIVE)
• 520 × 5 mm
• 8 pcs / 1 m

Packers

Tube Packer

Tube Packer

A traditional packer with stainless steel rods that have a classic crumbling effect.
Weight: 110 kg/m
Diameter: 635 mm

Double Packer

Double Packer

Ideal for high-quality two-step processing of medium and light soils in drier conditions.
Weight: 238 kg/m
Diameter: 370/470 mm

V-ring Packer

V-ring Packer

Heavy duty steel packer for all types of soils. Intensive crumbling and firming of the soil.
Weight: 176 kg/m (incl. Scrapers)
Diameter: 630 mm

SPRING Packer

SPRING Packer

The packer has an excellent crumbling effect and reduces the risk of blockage for soil with high moisture content.
Weight: 116 kg/m
Diameter: 550 mm

Tyrepacker

Tyrepacker

A packer made up of tyres (27×8,5 15 8PR) suitable for medium heavy soils with a good throughput in wet conditions.
weight: 180 kg/m
diameter: 700 mm

Steel Ring Packer

Steel Ring Packer

Packer with stainless steel components for superior compaction, suitable for all soil types.
Weight: 177 kg/m
Diameter: 525 mm

Double U-Ring Packer

Double U-Ring Packer

A double row steel packer with auto-cleaning effect, excellent break-up and low stickiness due to the „U“ rim profile.
Weight: 163 kg/m
Diameter: 600 mm

Roadpacker

Roadpacker

Packer made of a hard natural rubber suitable for all soil conditions with very low tack.
Weight: 193 kg/m
Diameter: 585 mm

Cutpack

Cutpack

Heavy steel packer with powerful cutting capabilities suitable for heavy soils.
weight: 235 kg/m
diameter: 630 mm

Hitch

Towing Eye

Towing Eye

35 mm • 40 mm • 51 mm

Ball Pin

Ball Pin

K80

Towing Bracket

Towing Bracket

Attachment III. cat.

Optional

CRUSHBAR

CRUSHBAR

CRUSHBAR—Fixed Paddles

CRUSHBAR—Fixed Paddles

Side Section Shields

Side Section Shields

Hydraulic Depth Adjustment

Hydraulic Depth Adjustment

Tine Harrow

Tine Harrow

Support Wheels

Support Wheels

Fertilizer Set

Fertilizer Set

Flow Dividers and Connecting Hoses

Trash cutter

Trash cutter

SWIFTERDISC XO_F XO 4000 F XO 4500 F XO 5000 F XO 6000 F XO 8000 F
Working width m 4 4.5 5 6 7.5
Transport width m 3 3 3 3 3
Transport length m 6.9 6.9 6.9 6.9 6.9
Working depth* cm 2 - 12 2 - 12 2 - 12 2 - 12 2 - 12
Number of Discs pcs 32 36 40 48 60
Recommended output* HP 120 - 160 140 - 170 170 - 220 200 - 260 290 - 340
Total Weight** kg 3680 - 5860 3890 - 6350 4110 - 6860 4490 - 7570 5720 - 9000

* depends on soil conditions
** depends on the machine accessories

Video

SWIFTERDISC XO_F

Photos

Leaflet

Scraper Spring packer

Scraper Spring packer

XO_F

  • 1 - 00712418 SCRAPER 1
  • 2 - KM000395 SCREW 2
  • 3 - KM000081 WASHER 2
  • 4 - KM000155 NUT 2
  • 5 - 00713124 SPRING 1
Scraper Steel ring packer

Scraper Steel ring packer

XO_F, XE

  • 1 - 00029738 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046596 HOLDER 1
Harrow tine

Harrow tine

XO_F

  • 1 - KM030007 TINE 1
  • 2 - 00002940 WASHER 1
  • 3 - KM380001 STIRRUP 1
  • 4 - KM000154 NUT 2
Paddle Crushbar

Paddle Crushbar

XO_F, XE

  • 1 - KM060349 HOLDER 1
  • 2 - KM060369 METAL SHEEL 1
  • 3 - KM000851 SCREW 2
  • 4 - KM000848 NUT 2
Levelling disc – right

Levelling disc – right

XO_F, XE

  • 1 - KM060250 DISC 1
  • 2 - KM000489 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1
Levelling disc – left

Levelling disc – left

XO_F, XE

  • 1 - KM060251 DISC 1
  • 2 - KM000489 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1
A-disc 520 × 5 mm

A-disc 520 × 5 mm

XO_F, XE

  • 1 - KM060230 DISC 1
  • 2 - KM000489 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1
Scraper V-ring roller

Scraper V-ring roller

XO_F, XE

  • 1 - 00037392 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00000754 HOLDER 1
Scraper Roadpacker

Scraper Roadpacker

XO_F, XE

  • 1 - 00023579 SCRAPER 1
  • 2 - KM000395 SCREW 1
  • 3 - KM000081 WASHER 1
  • 4 - KM000155 NUT 1
  • 5 - 00046816 HOLDER 1
Serrated disc 520 × 5 mm

Serrated disc 520 × 5 mm

XO_F, XE

  • 1 - KM060286 DISC 1
  • 2 - KM000489 SCREW 6
  • 3 - KM000056 WASHER 6
  • 4 - KM040146 HUB 1